













Polar X™ Free-Cut COB LED Strip Light, Warm, Natural or Cool White
Tax included. Shipping calculated at checkout
Need it cut to length? Our TrueFIT service does it for you
Polar X is a free-cut COB LED strip light: cut it to any length and get a continuous line of light with no visible LED dots, without needing a profile or cover. Choose warm (3000K), natural (4000K) or cool white.
It runs at 24V, so runs of up to 25m stay bright to the far end, and pre-soldered 2.5m driver connection cables are fitted at each end. Use it under kitchen cabinets, along plinths and inside wardrobes.
Polar X at a glance
- Cut points: cut anywhere along the strip
- Light: COB (chip on board), 512 LEDs per metre, no visible dots, 180° beam
- Colours: warm white (3000K), natural white (4000K) or cool white (6500K)
- Brightness: 600 lumens per metre
- Voltage: 24V, with no fade on runs of up to 25m
- Size: 8mm wide, 2mm deep; 3m, 5m, 10m and 25m reels
- IP rating: IP20, for dry areas
- Dimming: with a single colour receiver or a Sensio smart driver
- Fixing: VHB (very high bond) adhesive backing
- Connection: pre-soldered 2.5m driver connection cable at each end
- Guarantee: 7 years
- Registered design: 6366472
Where to use Polar X
Polar X gives a smooth, even line of light where the strip itself may be seen: under kitchen wall cabinets, along plinths, inside wardrobes and on shelves. Because it has no visible dots, it does not need a profile or cover, though it also fits our Fino, Linia and Zella profiles. For bathrooms and other damp areas, use Polar X IP65.
How to cut and connect Polar X
Cut Polar X to the exact length of each run. Plug the pre-soldered cable into a 24V LED driver, and add an extra driver connection cable (sold separately) to use the offcuts. To dim it, add a single colour receiver or smart driver. See can you cut LED strip lights? and what size LED driver do I need?
Browse all our LED strip lights, or let TrueFIT cut and solder Polar X to exact lengths, ready to fit.

Specification
Specification
Guides & Downloads
Guides & Downloads
View and download the product files and technical specifications
Dimensions
Driver Calculator
Questions and answers
Video guides
Guides & Downloads
View and download the product files and technical specifications

Adding Ambience
Providing a completely diffused line of light with no visible LED dots, you can create a soft ambient glow without the need for a profile or cover.

Compliment with colour
Our Polar X LED strip is available in natural white (4000K) or warm white (3000K). Choose natural to compliment light marble or warm to match natural woods.
Get the job done
Suggested Installation
Here is a package we'd recommend for setting up the Polar X LED strip.
You can work out what driver you need for your job on our calculator.

Titan Smart Kinetic Driver
Choose the correct single colour (2-pin) driver you require for installation. You can workout what wattage size you need on our calculator below.

Polar X Strip
Easily plug the Polar X LED flexible strip in to the driver using the 2-pin connection.

Kinetic Switch
Pair the 2 gang Kinetic Switch to your smart driver to control the light switching on/off as well as dimming.





















